|
Tällä sivulla esittelemme lyhyesti viimeisimmät uudet automallit ja
tarvikkeet. Tuotteet löydät tarkemmin tuotteet-sivulta.
7/2004
 |
| New
from the hands of Karl Heinz Meister is this hand modified
Outlaw 11.5mm crankshaft. This silicone embedded lightweight
crankshaft has had the timing optimised whilst other handwork
include the optimisation of fuel flow. A hard coating
treatment on the bell crank makes for better durability on the
crank pin but also when combined with the crankshafts polished
surfaces makes for better fuel flow. |
 |
 |
| Hand assembled, this new main bearing is
suitable for all NovaMega, and other Novarossi made .21
engines. Featuring, 6 ceramic balls and 3 steel balls, this
bearing is 0.9 grams lighter and also runs freer. The 3 steel
balls are used to clean the races and are evenly mounted to
ensure the bearing runs smooth and all vibrations are
eliminated. This bearing is based on the original Novarossi
races, cage and balls.
|
 |
 |
| Beautifully
machined from a single piece of aluminium this radio plate
bracket is a direct replacement for the original Serpent 710
composite version. Not only does it look great it also
increases the chassis stiffness due to its rigid design. An
absolute must for those who like their cars looking their best. |
 |
 |
| New for
your Serpent 710 is this beautifully machined, lightweight,
aluminium middle shaft bracket. This piece not only looks
great but also helps to reduce any flex in this part of the
drive train down to an absolute minimum. |
 |
 |
| Available
for the Serpent 710 are these new lightweight aluminum pulley
adaptors. Featuring a triangulated outer diameter, as opposed
to the normal circular outer diameter, these items are now
lighter than the originals therefore reducing rotating mass
and overall weight.
|
 |
 |
|
Designed for use on any 200mm chassis, these new aluminium
disk wheels make the job of setting up you car simpler and
more precise. 64mm in diameter they are designed to simulate
the optimised wheel and tyre size of the Serpent 710 which
allows the user to set the ride height consistently. Due to
the solid construction of the wheels they can be used in
conjunction with the Serpent, or other, camber gauge very
precisely, much more so than that of an actual wheel and tyre.
The wheels are anodised orange and have a rubber o-ring
around the circumference to protect the working surface from
scratching. These set-up wheels works especially well when
used with the set-up tools from Hudy. |
 |
 |
6/2004
 |
| Serpent has released these coated ceramic balls
for use in the differential of the Serpent 710. Extremely hard
and ultra lightweight these balls are a great option for those
who are looking for durability and that extra weight advantage.
They are supplied in a pack of 12 and are a direct replacement
for the standard steel, 3.9mm diameter versions. |
 |
 |
|
New from Serpent is this purple coated spring set. Made
from 1.9mm thick wire these new springs are now the hardest in
the Serpent range and ideal for really high traction
conditions. They come in a complete set of four, 2 short
springs (22.7mm) for the front and 2 long versions (27mm) for
the rear. All the springs have the ends grinded flat for even
load distribution.
Suitable for all Serpent cars.
|
 |
 |
5/2004
Xray on tuomassa markkinoille 1/8 polttiscrossaria. Auton on
suunniteltu tulevan markkinoille toukokuussa, valmiina kesän
koitoksiin. Meille ei ole vielä kerrottu tarkkaa hintaa, mutta
parhaiden arvioiden mukaan myyntihinta tulee olemaan 550,- ja 650,-
välillä.
3/2004
XRAY T1 Factory Kit
Lue lisää
tuotteista!
New Xray option parts
NEW OPTION
PARTS for XRAY T1
#305002 Ball
Diff. with Labyrinth Covers™ - (Factory Kit)
New Xray option parts
#305311
Wheel Axle-22mm-Integr. Hex Hub -
(Factory Kit) (2)
New Xray option parts
#305321
Drive Shaft-51mm-Spring Steel -
(Factory Kit) (2)
New Xray option parts
#305718
Pinion Gear Alu Hard Coated (48dp)
18T and
19T
NEW OPTION
PARTS for XRAY M18
#381111
Micro Graphite Chassis - Blue
#381151
Conversion Set for 300 Super Size Motor - Blue
+ paljon uusia
varaosia M18 autoon
Lue lisää
tuotteista (1/18 MICRO VARAOSAT)!
1/2004
SERPENT 710
polttomoottori-touring-auto
kesän 2004 asfalteille!
- odotettu uutuus Serpentiltä - 2 vuoden kehityksen tulos
- täysin uusi malli, suunnittelussa on lähdetty liikkeelle
puhtaalta pöydältä.
- täysin säädettävä jousitus ja ripustusgeometria
(kallistuskeskiöiden säätö), mitään vanhaa ei ole.
- Dynaaminen auraus takana
- nopeus yli 100 km/h, 2 vaihdetta
- jäykkä, nopea 4 mm pohjalevy, joka reunoista pyöristetty
- hiilikuituinen radiolevy ja sivujäykisteet
- takadiffin luisto säädettävissä
- yksi-suuntaislaakerit edessä, voidaan pikakytkeä kiinteäksi
- eteen säädettävä diffi lisävarusteena
- auto, josta olet ennen vain unelmoinut on nyt totta
- varaa omasi ajoissa!
Lue lisää
tuotteista!
12/2003
hupia ja hauskuutta kaikille!
TEAM XRAY
Micro uutuus Xray'ltä - M18
Lue lisää
tuotteista!
|
